Перейти к основному содержанию
Английский
Японский
Step 4
Carefully wedge a plastic opening tool between the hinge on the body as shown in the highlighted area in picture one. (be sure to insert the wedge into the right hinge when looking down onto the phone, as in the picture). Slowly pry the hinge off the body as shown being done in the second picture and set the phone down after done with this step. The phone may also be pried apart with your hands. Because you are  replacing the display screen with a new one, it is ok if the connector strip tears because the new display screen will have its own connector strip.
  • Carefully wedge a plastic opening tool between the hinge on the body as shown in the highlighted area in picture one. (be sure to insert the wedge into the right hinge when looking down onto the phone, as in the picture).

  • Slowly pry the hinge off the body as shown being done in the second picture and set the phone down after done with this step. The phone may also be pried apart with your hands.

  • Because you are replacing the display screen with a new one, it is ok if the connector strip tears because the new display screen will have its own connector strip.

  • Next slide the connector cable out of the slot on the back side of the phone and the screen will be disconnected from the key pad body.

Вставьте перевод здесь

Вставьте перевод здесь

Вставьте перевод здесь

Вставьте перевод здесь

Ваш вклад лицензируется под свободной лицензией Creative Commons.