Перейти к основному содержанию

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 4 руководства, которые включают этот шаг.

Английский
Китайский
Шаг 4
Try to keep the strips flat and unwrinkled during this procedure; wrinkled strips will stick together and break instead of pulling out cleanly. Slowly pull one of the battery adhesive strips away from the battery, toward the bottom of the iPhone.
  • Try to keep the strips flat and unwrinkled during this procedure; wrinkled strips will stick together and break instead of pulling out cleanly.

  • Slowly pull one of the battery adhesive strips away from the battery, toward the bottom of the iPhone.

  • Pull steadily, maintaining constant tension on the strip as it slips out from between the battery and the rear case. For best results, pull the strip at a 60º angle or less.

  • Guide the strip carefully around the corner and up the side of the battery. Be careful not to snag it on any of the other internal iPhone components.

  • The strip will stretch to many times its original length. Continue pulling, re-grabbing the strip near the battery if necessary, until the entire strip comes free.

尝试在此过程中保持胶带条状平整和不皱; 皱纹条将粘在一起,破坏未拉出的胶带导致无法干净利落地拉出来。

慢慢地将一块电池胶带从电池中拉出,朝向iPhone的底部。

稳定地拉动,保持条带上的张力不变,因为它从电池和后壳体之间滑出。 为了获得最佳效果,请在60º角度或更小的角度拉条。

小心地将胶带拉向电池的一侧。 注意不要被任何iPhone内部组件挂住。

该条将延伸到其原始长度的许多倍。 如果需要,继续拉动,重新抓住电池附近的胶带,直到整个胶带完全脱离。

Ваш вклад лицензируется под свободной лицензией Creative Commons.