Перейти к основному содержанию

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 11 руководства, которые включают этот шаг.

Английский
Итальянский
Шаг 7
Use the edge of a plastic opening tool to flip up the retaining flaps holding the digitizer ribbon cables in their sockets on the logic board. Be sure you are flipping up the retaining flap, not the socket itself. Pull the digitizer ribbon cables straight out of their sockets.
  • Use the edge of a plastic opening tool to flip up the retaining flaps holding the digitizer ribbon cables in their sockets on the logic board.

  • Be sure you are flipping up the retaining flap, not the socket itself.

  • Pull the digitizer ribbon cables straight out of their sockets.

Usa la punta di uno strumento di apertura in plastica per girare verso l'alto le alette di bloccaggio che tengono fermo i cavi del digitizer nelle loro prese sulla scheda madre.

Assicurati di far leva sull'aletta e non sul connettore.

Sfila i cavi a nastro del digitizer dalle loro prese.

Ваш вклад лицензируется под свободной лицензией Creative Commons.