Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Английский
Немецкий

Перевод шага 1

Шаг 1
Use a spudger to disconnect the Lightning connector ribbon cable from its socket on the logic board. The Lightning connector cable is lightly adhered to a shield on the logic board. Use the flat end of a spudger to gently peel the cable up. The Lightning connector cable is lightly adhered to a shield on the logic board. Use the flat end of a spudger to gently peel the cable up.
  • Use a spudger to disconnect the Lightning connector ribbon cable from its socket on the logic board.

  • The Lightning connector cable is lightly adhered to a shield on the logic board. Use the flat end of a spudger to gently peel the cable up.

Verwende einen Spudger um das Lighting Connector-Kabel aus seiner Halterung auf dem Logic Board zu entfernen.

Das Kabel des Lightning Connectors ist leicht an eine Abdeckung überhalb des Logicboards geklebt. Löse es vorsichtig mit dem flachen Ende eines Spudgers.

Ваш вклад лицензируется под свободной лицензией Creative Commons.