Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Примечание: Вы редактируете необходимое руководство. Любые внесенные вами изменения повлияют на руководство, которое включает эту стадию.

Английский
Итальянский

Перевод шага 1

Шаг 1
Use a spudger to disconnect the Lightning connector ribbon cable from its socket on the logic board. The Lightning connector cable is lightly adhered to a shield on the logic board. Use the flat end of a spudger to gently peel the cable up. The Lightning connector cable is lightly adhered to a shield on the logic board. Use the flat end of a spudger to gently peel the cable up.
  • Use a spudger to disconnect the Lightning connector ribbon cable from its socket on the logic board.

  • The Lightning connector cable is lightly adhered to a shield on the logic board. Use the flat end of a spudger to gently peel the cable up.

Usa uno spudger per scollegare il cavo piatto del connettore Lightning dalla sua presa sulla scheda logica.

Il cavo del connettore Lightning aderisce leggermente alla piastra sulla scheda madre. Stacca con cautela il cavo usando l'estremità piatta di uno spudger.

Ваш вклад лицензируется под свободной лицензией Creative Commons.