Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 14 руководства, которые включают этот шаг.

Английский
Китайский
Шаг 9
Lifting from the side nearest the battery, rotate the logic board toward the top of the MacBook Pro. You may need to slide the logic board a few millimeters to the left in order to get clearance for the ports along the right edge of the board.
  • Lifting from the side nearest the battery, rotate the logic board toward the top of the MacBook Pro.

  • You may need to slide the logic board a few millimeters to the left in order to get clearance for the ports along the right edge of the board.

  • Using the flat end of a spudger, carefully push the MagSafe 2 connector out of its socket on the bottom of the logic board.

  • Disconnecting the MagSafe 2 connector can be difficult. If you are only removing the logic board to temporarily get it out of the way, such as for a battery replacement, you may find it easier to simply remove the two 2.5 mm T5 Torx screws securing the MagSafe DC-In board, and then remove the logic board and MagSafe board together.

从靠近电池的一侧抬起,将主板向MacBook Pro的顶部旋转。

你可能需要将主板向左滑动几毫米,以便沿着电路板右边缘的端口获得间隙。

使用挑线器的扁平端,小心地将MagSafe 2连接器从逻辑板底部的插座中拔出。

分离MagSafe 2链接会比较困难。如果你只是想暂时的将主板的位置挪一下例如换电池,你可以看看这篇指南 remove the two 2.5 mm T5 Torx screws securing the MagSafe DC-In board, 然后将主板和MagSafe一起卸下。

Ваш вклад лицензируется под свободной лицензией Creative Commons.