Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 52 guides that include this step.

Английский
Французский
Шаг 5
Place an opening pick in the gap opened by the suction cup. Don't insert the opening pick any deeper than the black bezel on the side of the display. Inserting the pick too far may damage the LCD. Pull the suction cup's plastic nub to release the vacuum seal and remove the suction cup from the display assembly.
  • Place an opening pick in the gap opened by the suction cup.

  • Don't insert the opening pick any deeper than the black bezel on the side of the display. Inserting the pick too far may damage the LCD.

  • Pull the suction cup's plastic nub to release the vacuum seal and remove the suction cup from the display assembly.

Glisser le "médiator" dans la fente obtenue en tirant avec la ventouse.

Attention de ne pas introduire le "médiator" plus loin que la marge noire sur le bord de l'écran de l'iPad sous peine d'endommager l'écran LCD.

Tirer la tétine de la ventouse afin de libérer l'air et ainsi la décrocher de l'écran.

Ваш вклад лицензируется под свободной лицензией Creative Commons.