Перейти к основному содержанию

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 2 руководства, которые включают этот шаг.

Английский
Итальянский
Шаг 4
This step shows you how to properly unscrew the pressure plate. Remove the two 15.6 mm Phillips screws. Gradually unscrew the pressure plate by turning each screw one half turn at a time.
  • This step shows you how to properly unscrew the pressure plate.

  • Remove the two 15.6 mm Phillips screws.

  • Gradually unscrew the pressure plate by turning each screw one half turn at a time.

  • Alternate between the two screws to maintain even pressure on the pressure plate.

  • Do not unscrew one side completely before unscrewing the other side or you may damage the processor.

Questo passaggio ti mostrerà come rimuovere la piastra di pressione.

Rimuovi le due viti a croce Phillips da 15,6 mm.

Svita gradualmente le due viti facendo mezzo giro alla volta per ognuna.

Alternati tra le due viti per mantenere una pressione costante sulla piastra.

Non svitare completamente una vite alla volta lasciando avvitata l'altra perché potresti danneggiare il processore.

Ваш вклад лицензируется под свободной лицензией Creative Commons.