Перейти к основному содержанию

iPad Air Wi-Fi LCD Replacement

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 28 руководства, которые включают этот шаг.

Английский
Корейский
Шаг 3
iPad Air Wi-Fi LCD Replacement: шаг 0, изображение 1 из 3 iPad Air Wi-Fi LCD Replacement: шаг 0, изображение 2 из 3 iPad Air Wi-Fi LCD Replacement: шаг 0, изображение 3 из 3
  • Do not attempt to fully remove the LCD. It is still connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end.

  • Use the flat end of a spudger to pry the LCD out of its recess just enough to grab it with your fingers.

  • Flip the iPad LCD like a page in a book, lifting near the camera and turning it over the home button end of the rear case.

  • Be gentle and keep an eye on the LCD cables as you flip the display over.

  • Lay the LCD on its face to allow access to the display cables.

  • Set the LCD down on a soft, clean, lint-free surface.

Вставьте перевод здесь

Вставьте перевод здесь

Вставьте перевод здесь

Вставьте перевод здесь

Вставьте перевод здесь

Вставьте перевод здесь

Ваш вклад лицензируется под свободной лицензией Creative Commons .