Перейти к основному содержанию

Fix Your Stuff

Right to Repair

Parts & Tools

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

Английский
Немецкий
Шаг 32
Insert a plastic opening tool in the rectangular gap in the upper area of the logic board, and pry the logic board up from the rear case. While keeping the opening tool underneath the logic board, slide it down the length of the gap to free the upper end of the logic board from the adhesive. While keeping the opening tool underneath the logic board, slide it down the length of the gap to free the upper end of the logic board from the adhesive.
  • Insert a plastic opening tool in the rectangular gap in the upper area of the logic board, and pry the logic board up from the rear case.

  • While keeping the opening tool underneath the logic board, slide it down the length of the gap to free the upper end of the logic board from the adhesive.

Setze ein Plastiköffnungswerkzeug in die rechteckigen Öffnung im oberen Bereich des Logic Boards und heble das Logic Board vom Gehäuse weg.

Lasse das Öffnungswerkzeug unter dem Logic Board und schiebe es entlang der Öffnung. Löse so das obere Ende des Logic Board von der Klebeverbindung.

Ваш вклад лицензируется под свободной лицензией Creative Commons.