Перейти к основному содержанию

Het herkennen en ontkoppelen van verschillende kabelaansluitingen

Английский
Голландский
Шаг 3
Recognizing & Disconnecting Cable Connectors, Locking Tab Connectors: шаг 0, изображение 1 из 3 Recognizing & Disconnecting Cable Connectors, Locking Tab Connectors: шаг 0, изображение 2 из 3 Recognizing & Disconnecting Cable Connectors, Locking Tab Connectors: шаг 0, изображение 3 из 3
Locking Tab Connectors
  • Some ribbon cable connectors have a plastic locking tab around them. These are often used in large game consoles and mice.

  • Use a spudger to gently push up on alternating sides of the plastic tab until it clicks up into its unlocked position.

  • Don't push the tab too hard or too far, otherwise it may come completely off the connector.

  • Once the tab is unlocked, you can gently pull the cable straight out of its socket.

  • The cable should be able to slide in and out of the socket with little to no force. If you feel resistance, the tab may not be fully unlocked.

  • During reassembly, insert the cable into its socket and use the flat end of a spudger to push the tab down into its locked position.

Sommige lintkabelconnectoren hebben een plastic vergrendelingslipje eromheen. Deze worden vaak gebruikt in grote spelconsoles en muizen.

Gebruik een spudger om voorzichtig de plastic lipjes aan beide kanten omhoog te duwen totdat ze in de ontgrendelde positie vastklikken.

Duw het lipje niet te hard of te ver, anders kan het geheel loskomen van de connector.

Zodra het lipje ontgrendeld is, kun je de kabel voorzichtig uit de aansluiting trekken.

De kabel moet met weinig tot geen kracht in en uit de socket kunnen glijden. Als je weerstand voelt, is het lipje mogelijk niet volledig ontgrendeld.

Steek tijdens het opnieuw monteren de kabel in de aansluiting en gebruik het platte uiteinde van een spudger om het lipje in de vergrendelde positie te duwen.

Ваш вклад лицензируется под свободной лицензией Creative Commons .