Почините Свои Вещи Сообщество Магазин

认识和断开线缆连接头

Назад к руководству
Английский
Китайский
Шаг 3
Recognizing & Disconnecting Cable Connectors, Locking Tab Connectors: шаг 0, изображение 1 из 3 Recognizing & Disconnecting Cable Connectors, Locking Tab Connectors: шаг 0, изображение 2 из 3 Recognizing & Disconnecting Cable Connectors, Locking Tab Connectors: шаг 0, изображение 3 из 3
Locking Tab Connectors

  • Some ribbon cable connectors have a plastic locking tab around them. These are often used in large game consoles and mice.

  • Use a spudger to gently push up on alternating sides of the plastic tab until it clicks up into its unlocked position.

  • Don't push the tab too hard or too far, otherwise it may come completely off the connector.

  • Once the tab is unlocked, you can gently pull the cable straight out of its socket.

  • The cable should be able to slide in and out of the socket with little to no force. If you feel resistance, the tab may not be fully unlocked.

  • During reassembly, insert the cable into its socket and use the flat end of a spudger to push the tab down into its locked position.

带卡舌的接口

有些排线接口周围有一个塑料卡舌。这种接口常见于大型游戏主机与鼠标中。

用撬棒轻轻向上推动塑料卡舌的两侧，直到卡舌卡到解锁位置。

不要推卡舌太用力或太长行程，否则可能会使其彻底脱离，损坏接口。

卡舌解锁后你便可轻轻将排线从线槽中直接拉出。

排线应当能几乎不费力地从线槽中滑入滑出。如果你感到阻力，卡舌可能没有完全解锁。

组装过程中，应将排线插入线槽后用撬棒的平端压下卡舌到锁定位置。

Ваш вклад лицензируется под свободной лицензией Creative Commons .