Меню

Your Settings

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

Назад к руководству
Английский
Японский
Step 11
Use the tip of a spudger to flip the retaining tab on the microphone cable ZIF connector. Pull the microphone cable out of its socket on the logic board. Pull the microphone cable out of its socket on the logic board.

  • Use the tip of a spudger to flip the retaining tab on the microphone cable ZIF connector.

  • Pull the microphone cable out of its socket on the logic board.

スパッジャーの先端を使って、マイクケーブルのZIF コネクター上の固定タブをひっくり返します。

マイクケーブルをロジックボード上のソケットから引っ張り取り出します。

Ваш вклад лицензируется под свободной лицензией Creative Commons.