Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 12 руководства, которые включают этот шаг.
Перевод шага 2
Шаг 2
-
Grasp the small tab at the end of one of the bottom edge display adhesive strips and pull the adhesive toward the top of the iMac to remove it.
-
Repeat this step with the other adhesive strip and remove it.
| - | [* icon_note] If necessary, a plastic card can be used to cut any remaining sections of the bottom adhesive strip. |
|---|---|
| + | [* icon_caution] Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red). |
| + | [* black] Grasp the small tab at the end of one of the bottom edge display adhesive strips and pull the adhesive toward the top of the iMac to remove it. |
| + | [* black] Repeat this step with the other adhesive strip and remove it. |
| + | [* icon_note] If either adhesive strip breaks before it's removed, use a [product|IF145-101|plastic card] to slice through the remaining adhesive. |
Ваш вклад лицензируется под свободной лицензией Creative Commons .