Перейти к основному содержанию

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 25 руководства, которые включают этот шаг.

Английский
Итальянский
Шаг 8
Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges. Flip the power supply over to access the DC power cable connection behind the logic board.
  • Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges.

  • Flip the power supply over to access the DC power cable connection behind the logic board.

  • Squeeze the tab on the back side of the DC power cable connector and pull it straight out of its socket on the back of the logic board.

Stai molto attento a non toccare i contatti dei condensatori o le saldature sul retro dell'alimentatore. Spostalo toccando esclusivamente i bordi della scheda.

Gira l'alimentatore per avere accesso al cavo di alimentazione DC sul retro della scheda madre.

Schiaccia l'aletta sul retro del connettore del cavo di alimentazione e sfilalo dalla sua presa sulla scheda madre.

Ваш вклад лицензируется под свободной лицензией Creative Commons.