Перейти к основному содержанию

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 18 руководства, которые включают этот шаг.

Английский
Китайский
Шаг 8
Use a clean fingernail or the edge of an opening tool to gently pry the battery connector up from its socket on the logic board.
  • Use a clean fingernail or the edge of an opening tool to gently pry the battery connector up from its socket on the logic board.

  • Take care to only pry up on the battery connector, and not the socket on the logic board. If you pry up on the logic board socket, you may break the connector entirely.

用塑料撬棍从主板上撬下电池排线的接头。

注意只在排线接口上用力,不要伤到主板上的接口插座。如果你撬到了接口插座,你可能会直接把接口弄坏。

[* black] Use a plasticclean fingernail or the edge of an opening tool to gently pry the battery connector up from its socket on the logic board.
[* black] Use a plasticclean fingernail or the edge of an opening tool to gently pry the battery connector up from its socket on the logic board.
[* icon_caution] Take care to '''only''' pry up on the battery connector, and not the socket on the logic board. If you pry up on the logic board socket, you may break the connector entirely.

Ваш вклад лицензируется под свободной лицензией Creative Commons.