Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Английский
Китайский

Translating step 1

Step 1
Remove the following Phillips screws securing the upper component bracket:
  • Remove the following Phillips screws securing the upper component bracket:

  • One 1.5 mm screw

  • Two 2.3 mm screws

松开盖板上方的固定螺丝:

1颗1.5mm飞利浦#00螺丝

2颗2.3mm飞利浦#00螺丝

[* black] Remove the following Phillips screws securing the upper component bracket:
[* red] One 1.5 mm Phillips #00 screw
[* orange] Two 2.3 mm Phillips #00 screws
[* black] Remove the following Phillips screws securing the upper component bracket:
[* red] One 1.5 mm Phillips #00 screw
[* orange] Two 2.3 mm Phillips #00 screws

Ваш вклад лицензируется под свободной лицензией Creative Commons.