Перейти к основному содержанию

MacBook Pro 15" Unibody mid 2010 Vervanging van de batterij

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 19 руководства, которые включают этот шаг.

Английский
Голландский

Перевод шага 4

Шаг 4
MacBook Pro 15" Unibody Mid 2010 Battery Replacement: шаг 0, изображение 1 из 1
  • Tilt the battery away from the logic board enough to access the battery cable connector.

  • Pull the battery cable connector away from its socket on the logic board and remove the battery from the upper case.

  • Pull the battery cable connector away from the center of the logic board.

  • If you're installing a new battery, you should calibrate it after installation:

  • Charge it to 100%, and then keep charging it for at least 2 more hours. Next, unplug and use it normally to drain the battery. When you see the low battery warning, save your work, and keep your laptop on until it goes to sleep due to low battery. Wait at least 5 hours, then charge your laptop uninterrupted to 100%.

  • If you notice any unusual behavior or problems after installing your new battery, you may need to reset your MacBook's SMC.

Kantel de batterij ver genoeg van het logic board weg om zo toegang te krijgen tot de kabelaansluiting van de batterij.

Trek de kabelaansluiting van de batterij weg van het contact op het logic board en verwijder de batterij uit de bovenste behuizing.

Trek de kabelaansluiting van de batterij weg van het midden van het logic board.

Zorg dat je je nieuwe batterij, na het installeren, kalibreert:

Laad deze op tot 100% en laat 'm nog minstens twee uur doorladen. Gebruik je apparaat vervolgens totdat deze uitvalt vanwege een lege batterij. Wacht minstens 5 uur en laad je batterij tot slot nog een keer ononderbroken op tot 100%.

Als je vreemd gedrag of problemen tegenkomt na het installeren van je nieuwe batterij kan het handig zijn om de SMC van je MacBook te resetten.

Ваш вклад лицензируется под свободной лицензией Creative Commons .