Перейти к основному содержанию
Английский
Китайский

Перевод шага 8

Шаг 8
Now screw the new primer pump in by hand as far as you can, then use a wrench (the new ones take a 17mm) to snug it down. There is no need to wrench on it really heavily, just turn it until you feel resistance as the crush washer deforms to create a seal under the pump.
  • Now screw the new primer pump in by hand as far as you can, then use a wrench (the new ones take a 17mm) to snug it down. There is no need to wrench on it really heavily, just turn it until you feel resistance as the crush washer deforms to create a seal under the pump.

Вставьте перевод здесь

Ваш вклад лицензируется под свободной лицензией Creative Commons.