Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 13 guides that include this step.

Английский
Японский
Шаг 8
Use the edge of an iPod opening tool to flip up the retaining flaps holding the digitizer ribbon cables in their sockets on the logic board. Be sure you are flipping up the retaining flap, not the socket itself. Pull the digitizer ribbon cables straight out of their sockets.
  • Use the edge of an iPod opening tool to flip up the retaining flaps holding the digitizer ribbon cables in their sockets on the logic board.

  • Be sure you are flipping up the retaining flap, not the socket itself.

  • Pull the digitizer ribbon cables straight out of their sockets.

iPod開口ツールの先端を使って、デジタイザーリボンケーブルをロジックボード上のソケットに付けている固定フラップを跳ね上げます。

ソケットではなく、固定フラップのみを跳ね上げてください。

ソケットからデジタイザーリボンケーブルをまっすぐ引き抜きます。

Ваш вклад лицензируется под свободной лицензией Creative Commons.