Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

Английский
Французский
Шаг 4
Wedge the flat end of a spudger inbetween the battery and the front panel assembly. Run the flat end of a spudger along the top edge of the battery to separate it from the adhesive securing it to the front panel assembly. If you encounter any resistance from the remaining adhesive, simply use the flat end of a spudger to remove the excess adhesive.
  • Wedge the flat end of a spudger inbetween the battery and the front panel assembly.

  • Run the flat end of a spudger along the top edge of the battery to separate it from the adhesive securing it to the front panel assembly.

  • If you encounter any resistance from the remaining adhesive, simply use the flat end of a spudger to remove the excess adhesive.

Caler l'extrémité plate d'un spudger entre la batterie et le panneau avant

Passez l'extrémité plate d'un spudger le long du bord supérieur de la batterie pour la séparer de l'adhésif qui la fixe au panneau avant.

Si vous rencontrez une résistance de la part de l'adhésif restant, utilisez simplement l'extrémité plate d'un spudger pour éliminer l'excès d'adhésif.

[title] Battery Removal
[*
* black] Wedge the flat end of a spudger inbetween the battery and the front panel assemblyassembly.
[* black] Run the flat end of a spudger along the top edge of the battery to separate it from the adhesive securing it to the front panel assemblyassembly.
[* icon_cautionicon_note] If you encounter any resistance from the remaining adhesive, simply use the flat end of a spudger to remove the excess adhesiveadhesive.
[title] Battery Removal
[*
* black] Wedge the flat end of a spudger inbetween the battery and the front panel assemblyassembly.
[* black] Run the flat end of a spudger along the top edge of the battery to separate it from the adhesive securing it to the front panel assemblyassembly.
[* icon_cautionicon_note] If you encounter any resistance from the remaining adhesive, simply use the flat end of a spudger to remove the excess adhesiveadhesive.

Ваш вклад лицензируется под свободной лицензией Creative Commons.