Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 48 guides that include this step.

Английский
Немецкий
Шаг 13
Leave the opening pick in the iPad slightly past the front-facing camera. Take a second pick and insert it to the left of the camera, where the first pick just was. Slide it back to the corner to completely cut any remaining adhesive. Leave the second pick in place to prevent the corner adhesive from re-sealing as it cools.
  • Leave the opening pick in the iPad slightly past the front-facing camera.

  • Take a second pick and insert it to the left of the camera, where the first pick just was. Slide it back to the corner to completely cut any remaining adhesive.

  • Leave the second pick in place to prevent the corner adhesive from re-sealing as it cools.

Lasse das Plektrum nun kurz hinter der Frontkamera.

Nimm dir ein zweites Plektrum und schiebe es links von der Frontkamera zwischen Gehäuse und Bildschirm, wo sich das andere Plektrum zuvor befand.

Lasse das zweite Plektrum wo es ist, damit der Kleber während des Abkühlens nicht erneut Glas und Gehäuse verbindet.

Ваш вклад лицензируется под свободной лицензией Creative Commons.