Перейти к основному содержанию

iPad Mini 3 Wi-Fi 液晶显示板更换

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 48 руководства, которые включают этот шаг.

Английский
Китайский
Шаг 22
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: шаг 0, изображение 1 из 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: шаг 0, изображение 2 из 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: шаг 0, изображение 3 из 3
  • Insert the tip of one last pick next to the previous step's pick, and slide it beneath the home button.

  • Stop about an inch from the right-hand side to avoid cutting the digitizer cable.

  • Insert the pick slightly deeper and work it back toward the home button.

  • Again, be sure to only slide the pick toward the center of the iPad when it is fully inserted; otherwise you may damage the antenna beneath the glass.

拿一片新的撬片来从刚才那片撬片右边Home键下方继续滑动。

在距离右侧边缘约一英寸的位置前停下,以避免切割到排线。

将撬片深入,再往回滑动至Home键处。

再次,请确保只有当撬片完全插入iPad时,才能向iPad的中心滑动; 否则可能会损坏玻璃面板下方的天线。

Ваш вклад лицензируется под свободной лицензией Creative Commons .