Перейти к основному содержанию

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 8 руководства, которые включают этот шаг.

Английский
Итальянский
Шаг 8
Starting with the spudger you left in the crack, pry the upper case up to free the last few clips. Use a plastic opening tool to pop any straggler clips that weren't freed. Do not try to remove the upper case yet, as it is still connected by the front panel button cable.
  • Starting with the spudger you left in the crack, pry the upper case up to free the last few clips.

  • Use a plastic opening tool to pop any straggler clips that weren't freed.

  • Do not try to remove the upper case yet, as it is still connected by the front panel button cable.

  • Lift the upper case slightly and shift it to give access to the front panel board.

Partendo dallo spudger che hai inserito nello spazio tra le due parti della scocca, solleva la parte superiore della scocca per liberare le ultime clip.

Usa uno spudger di plastica per separare ogni clip che non si è staccata.

Non provare a rimuovere il case superiore già a questo punto, in quanto è ancora collegato dal cavo del bottone di accensione.

Solleva un po' la copertura superiore e falla scorrere per liberare l'accesso al pannello di controllo frontale.

Ваш вклад лицензируется под свободной лицензией Creative Commons.