Перейти к основному содержанию

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 4 guides that include this step.

Английский
Японский

Translating step 1

Шаг 1
For the following step, you only need to move the locking bar about 2 mm. Pushing too hard or too far will damage the connector.
  • For the following step, you only need to move the locking bar about 2 mm. Pushing too hard or too far will damage the connector.

  • Loosen the connector by pulling the brown locking bar toward the hard drive cable using the tips of your fingers.

次の手順は、ロッキングバーを約2mm動かすだけです。力強く、あるいは奥深く押し込むとコネクタを損傷します。

指先を使って、茶色のロッキングバーをハードドライブケーブルに向けて引っ張り、コネクタを緩めます。

Ваш вклад лицензируется под свободной лицензией Creative Commons.