Перейти к основному содержанию

Remplacement de la batterie de l'Apple Watch

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 5 руководства, которые включают этот шаг.

Английский
Французский
Шаг 10
Apple Watch Battery Replacement: шаг 0, изображение 1 из 3 Apple Watch Battery Replacement: шаг 0, изображение 2 из 3 Apple Watch Battery Replacement: шаг 0, изображение 3 из 3
  • There are two cables connecting the screen to the inside of the watch, near the top left corner. Be careful when prying or you may damage these cables.

  • Pry slightly up on the right side of the screen, to free it from any remaining adhesive.

  • Pry up on the left to free it as well—but do not attempt to remove the screen as it is still held in place by two cables.

L'écran est connecté à l'intérieur de la montre par deux câbles situés près de l'angle supérieur gauche. Faites très attention en soulevant l'écran ou vous risquez d'endommager ces câbles.

Soulevez légèrement le côté droit de l'écran pour le libérer d'éventuels restes d'adhésif.

Soulevez également le côté gauche de l'écran - mais n'essayez pas de retirer l'écran. Il est encore attaché par deux câbles.

Ваш вклад лицензируется под свободной лицензией Creative Commons .