Перейти к основному содержанию

Sostituzione batteria dell'Apple Watch

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 5 руководства, которые включают этот шаг.

Английский
Итальянский
Шаг 10
Apple Watch Battery Replacement: шаг 0, изображение 1 из 3 Apple Watch Battery Replacement: шаг 0, изображение 2 из 3 Apple Watch Battery Replacement: шаг 0, изображение 3 из 3
  • There are two cables connecting the screen to the inside of the watch, near the top left corner. Be careful when prying or you may damage these cables.

  • Pry slightly up on the right side of the screen, to free it from any remaining adhesive.

  • Pry up on the left to free it as well—but do not attempt to remove the screen as it is still held in place by two cables.

Ci sono due cavi che collegano lo schermo all'interno dell'orologio, vicino al bordo sinistro in alto. Fai attenzione quando lo apri o potresti rovinare questi cavi.

Solleva leggermente il bordo destro dello schermo per liberarlo completamente dall'adesivo rimanente.

Solleva anche il bordo sinistro per liberarlo - ma non cercare di rimuovere lo schermo in quanto da quel lato sono ancora collegati i due cavi.

Ваш вклад лицензируется под свободной лицензией Creative Commons .