Перейти к основному содержанию
Английский
Итальянский
Шаг 3
Place the desoldering wick on top of the existing solder ball.
  • Place the desoldering wick on top of the existing solder ball.

  • Place the soldering iron on top of wick above the existing solder ball.

  • Hold the soldering iron in place until the solder melts into the wick.

  • Repeat the same procedure on the remaining two connectors.

Appoggia lo stoppino dissaldante sulle saldature.

Appoggia il saldatore sullo stoppino sopra le saldature.

Tieni il saldatore in posizione finché la saldatura si scioglie sullo stoppino.

Ripeti la procedura per le altre due saldature.

Ваш вклад лицензируется под свободной лицензией Creative Commons.