Перейти к основному содержанию
Английский
Итальянский
Step 2
Start off by removing the spacer from the bottom dock port. It is just pushed in, so all you need is a small jeweler's screwdriver to pry it out. Use the smaller ends of the port as the pry point so you don't break the spacer.
  • Start off by removing the spacer from the bottom dock port. It is just pushed in, so all you need is a small jeweler's screwdriver to pry it out. Use the smaller ends of the port as the pry point so you don't break the spacer.

Вставьте перевод здесь

Ваш вклад лицензируется под свободной лицензией Creative Commons.