Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 25 guides that include this step.

Английский
Испанский
Step 2
Once the rear glass is hot to the touch, apply a suction cup near the bottom edge  of the glass. Lift on the suction cup to create a small gap underneath the rear glass, and insert an opening pick into the gap. Optionally, once the pick is inserted, you can add a few drops of isopropyl alcohol into the gap to help weaken the adhesive in the following steps.
  • Once the rear glass is hot to the touch, apply a suction cup near the bottom edge of the glass.

  • Lift on the suction cup to create a small gap underneath the rear glass, and insert an opening pick into the gap.

  • Optionally, once the pick is inserted, you can add a few drops of isopropyl alcohol into the gap to help weaken the adhesive in the following steps.

Una vez que el panel esté lo suficientemente caliente al tacto, coloca una ventosa lo más cerca posible del borde calentado, evitando la parte curvada.

Levanta de la ventosa para crear un pequeño espacio por debajo del cristal trasero e inserta una púa de apertura en el espacio.

Como opción, una vez que la púa esté introducida, puedes agregar unas pocas gotas de alcohol isopropílico dentro del espacio para ayudar a debilitar el adhesivo en los pasos siguientes.

Ваш вклад лицензируется под свободной лицензией Creative Commons.