Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 25 guides that include this step.

Английский
Китайский
Step 2
Once the rear glass is hot to the touch, apply a suction cup near the bottom edge  of the glass. Lift on the suction cup to create a small gap underneath the rear glass, and insert an opening pick into the gap. Optionally, once the pick is inserted, you can add a few drops of isopropyl alcohol into the gap to help weaken the adhesive in the following steps.
  • Once the rear glass is hot to the touch, apply a suction cup near the bottom edge of the glass.

  • Lift on the suction cup to create a small gap underneath the rear glass, and insert an opening pick into the gap.

  • Optionally, once the pick is inserted, you can add a few drops of isopropyl alcohol into the gap to help weaken the adhesive in the following steps.

将吸盘紧紧吸在后部玻璃面板的下部。

[* black] AttachOnce the rear glass is hot to the touch, apply a suctionsuction cup near the bottom edge of the glass.
[* black] Lift on the suction
cup to create a small gap underneath the lower halfrear glass, and insert an opening pick into the gap.
[* icon_note] Optionally, once the pick is inserted, you can add a few drops
of isopropyl alcohol into the rear glass panelgap to help weaken the adhesive in the following steps.
[* black] AttachOnce the rear glass is hot to the touch, apply a suctionsuction cup near the bottom edge of the glass.
[* black] Lift on the suction
cup to create a small gap underneath the lower halfrear glass, and insert an opening pick into the gap.
[* icon_note] Optionally, once the pick is inserted, you can add a few drops
of isopropyl alcohol into the rear glass panelgap to help weaken the adhesive in the following steps.

Ваш вклад лицензируется под свободной лицензией Creative Commons.