Перейти к основному содержанию
Английский
Итальянский
Шаг 8
Lay the DVD drive board next to the DVD drive in such a manner that the cables soldered to the DVD drive board are out of the way (as shown in the picture)
  • Lay the DVD drive board next to the DVD drive in such a manner that the cables soldered to the DVD drive board are out of the way (as shown in the picture)

  • Remove the single 5.0 mm Phillips screw from the DVD lens EMI shield.

Appoggia la scheda del lettore DVD accanto al lettore stesso in modo che i cavi saldati alla scheda non ti intralcino (come mostrato nell'immagine).

Svita la vite a croce Phillips da 5,0 mm sulla schermatura EMI del lettore DVD.

Ваш вклад лицензируется под свободной лицензией Creative Commons.