Перейти к основному содержанию

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 18 руководства, которые включают этот шаг.

Английский
Испанский
Шаг 5
Firmly pull up on the suction cup to create a small gap between the front panel and the rear case. Do not pull too hard or you may shatter the glass. Once you've opened a sufficient gap, insert an opening pick into the gap to prevent the adhesive from resealing.
  • Firmly pull up on the suction cup to create a small gap between the front panel and the rear case.

  • Do not pull too hard or you may shatter the glass.

  • Once you've opened a sufficient gap, insert an opening pick into the gap to prevent the adhesive from resealing.

Levanta firmemente la ventosa para crear una pequeña brecha entre el panel frontal y la carcasa posterior.

No tires muy fuerte o podrías romper el vidrio.

Cuando hayas abierto una brecha suficiente, inserta una púa de apertura dentro de la brecha para prevenir que el adhesivo vuelva a sellarse.

-[* black] Firmly pull up on the suction cup to to create a small gap between the front panel and the rear case.
+[* black] Firmly pull up on the suction cup to create a small gap between the front panel and the rear case.
[* icon_caution] Do not pull too hard or you may shatter the glass.
[* black] Once you've opened a sufficient gap, insert an opening pick into the gap to prevent the adhesive from resealing.

Ваш вклад лицензируется под свободной лицензией Creative Commons.