Перейти к основному содержанию

iPad Air 2 Wi-Fi フロントパネル取り外し

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 18 руководства, которые включают этот шаг.

Английский
Японский

Перевод шага 1

Шаг 1
iPad Air 2 Wi-Fi  Opening Procedure: шаг 0, изображение 1 из 3 iPad Air 2 Wi-Fi  Opening Procedure: шаг 0, изображение 2 из 3 iPad Air 2 Wi-Fi  Opening Procedure: шаг 0, изображение 3 из 3
  • If your display glass is cracked, keep further breakage contained and prevent bodily harm during your repair by taping the glass.

  • Lay overlapping strips of clear packing tape over the iPad's display until the whole face is covered.

  • This will keep glass shards contained and provide structural integrity when prying and lifting the display.

  • Do your best to follow the rest of the guide as described. However, once the glass is broken, it will likely continue to crack as you work, and you may need to use a metal prying tool to scoop the glass out.

  • Wear safety glasses to protect your eyes, and be careful not to damage the LCD screen.

液晶ガラスにひびが入っている場合はさらにひび割れが広がらないように、また修理作業中怪我をしないように、保護メガネを装着してください。

iPadディスプレイ全体を透明色の補強テープで何重にも覆ってください。

これはディスプレイを持ち上げた際ガラスの破片を固定して、全体の構造を保つためです。

記載された通りの手順に従ってください。しかしながら、ガラスが一度割れてしまうと何度もひび割れてしまうことがあります。この場合はガラスをすくい上げるようにして取り出さなければならず、メタル製の開口ツールが必要になります。

目を保護するために保護メガネを装着してください。そしてLCDスクリーンを傷つけないようご注意ください。

Ваш вклад лицензируется под свободной лицензией Creative Commons .