Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Английский
Французский
Шаг 2
Remove the Home Button bracket and peel up the tape connected to it. During reassembly, after installing the home button, you'll need to glue this bracket into place to secure it Scrape off as much of the old adhesive residue from the bracket as you can, then clean it with acetone or high-concentration (90% or greater) isopropyl alcohol.
  • Remove the Home Button bracket and peel up the tape connected to it.

  • During reassembly, after installing the home button, you'll need to glue this bracket into place to secure it

  • Scrape off as much of the old adhesive residue from the bracket as you can, then clean it with acetone or high-concentration (90% or greater) isopropyl alcohol.

  • Secure the bracket with hot-melt glue, superglue, or high-strength double-sided tape. Make sure the bracket is aligned correctly before allowing your adhesive to cure, or the home button will not click when pressed.

Retirez le support du bouton home et décollez le ruban adhésif qui lui est fixé.

[* black] Remove the Home Button bracket and peel up the tape connected to it.
[* icon_reminder] During reassembly, after installing the home button, you'll need to glue this bracket into place to secure it
[* black] Scrape off as much of the old adhesive residue from the bracket as you can, then clean it with acetone or high-concentration (90% or greater) isopropyl alcohol.
[* black] Secure the bracket with hot-melt glue, superglue, or [product|IF317-072|high-strength double-sided tape]. Make sure the bracket is aligned correctly before allowing your adhesive to cure, or the home button will not click when pressed.

Ваш вклад лицензируется под свободной лицензией Creative Commons.