Перейти к основному содержанию
Английский
Китайский
Step 2
Throughout the following procedure, you'll be sliding thin plastic cards between the battery and rear case of the iPad, to separate the adhesive securing the battery. Be careful to keep the cards as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals. Once the adhesive has had a couple minutes to soften, flip the iPad over, battery-side up.
  • Throughout the following procedure, you'll be sliding thin plastic cards between the battery and rear case of the iPad, to separate the adhesive securing the battery. Be careful to keep the cards as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals.

  • Once the adhesive has had a couple minutes to soften, flip the iPad over, battery-side up.

  • Insert a plastic card underneath the battery contacts.

  • There is a metal standoff under the battery contact. You will need to lift the contact up slightly to clear this standoff and insert the plastic card.

  • Push the card about an inch under the battery to begin breaking up the adhesive holding it in place.

在整个过程中,您将在iPad的电池和后盖之间滑动薄塑料卡,以分离固定电池的粘合剂。 小心保持卡片尽可能平坦,以避免弯曲电池,这可能会损坏电池,并释放出危险的化学物质。

一旦粘合剂有几分钟软化,将iPad翻转过来,电池端向上。

将塑料卡插入电池触点下方。

电池触点下有一个金属支架。 您需要稍微提起接触点以移除此支架,然后插入塑料卡。

将卡推入电池下方约一英寸,电池开始与粘合剂分离。

Ваш вклад лицензируется под свободной лицензией Creative Commons.