Перейти к основному содержанию

Remplacement de l'ensemble LCD du MacBook Core Duo

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 14 руководства, которые включают этот шаг.

Английский
Французский
Шаг 7
MacBook Core Duo LCD Assembly Replacement: шаг 0, изображение 1 из 1
  • Remove the twelve 4.2 mm Phillips screws securing the LCD assembly to the rear display bezel.

  • Make sure you pay attention to how the microphone cable (and antenna cable on some models) are routed around the outside of the two screws at the bottom left and right corners of the screen. It's easy to damage the cables if not routed properly when reinstalling these screws. To see the cable routing more clearly, click on the photo and zoom in.

Dévissez les douze vis cruciformes de 4,2 mm fixant l'ensemble LCD au capot arrière de l'écran.

Faites attention à la façon dont la nappe du microphone (et la nappe de l'antenne sur certains modèles) est placée tout autour des deux vis les plus proches du bas de l'écran (à droite comme à gauche). Les nappes s'endommagent facilement si elles ne sont pas placées correctement au moment de revisser ces vis.

[* red] Remove the twelve 4.2 mm Phillips screws securing the LCD assembly to the rear display bezel.
-[* icon_note] Make sure you pay attention to how the microphone cable (and antenna cable on some models) are routed around the outside of the two screws nearest to the bottom of the screen (on both left and right). It's easy to damage the cables if not routed properly when putting these screws back on.
+[* icon_note] Make sure you pay attention to how the microphone cable (and antenna cable on some models) are routed around the outside of the two screws at the bottom left and right corners of the screen. It's easy to damage the cables if not routed properly when reinstalling these screws. To see the cable routing more clearly, click on the photo and zoom in.

Ваш вклад лицензируется под свободной лицензией Creative Commons .