Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 11 guides that include this step.

Английский
Французский
Шаг 4
Remove the 1.6 mm Phillips screw securing the pressure contact to the logic board near the vibrator. Remove the pressure contact.
  • Remove the 1.6 mm Phillips screw securing the pressure contact to the logic board near the vibrator.

  • Remove the pressure contact.

Retirez la vis cruciforme de 1,6 mm qui maintient le contact de pression à la carte mère près du vibreur.

Retirez le contact de pression.

Ваш вклад лицензируется под свободной лицензией Creative Commons.