Меню

Your Settings

Notice: You are editing a prerequisite guide. Any changes you make will affect all 11 guides that include this step.

Назад к руководству
Английский
Итальянский
Step 5
Use the edge of a plastic opening tool to pry the cellular antenna cable up from its socket on the logic board. De-route the cellular antenna cable out from under the metal fingers attached to the logic board.

  • Use the edge of a plastic opening tool to pry the cellular antenna cable up from its socket on the logic board.

  • De-route the cellular antenna cable out from under the metal fingers attached to the logic board.

  • When reconnecting the antenna wire be VERY certain that the round connector at the end of the wire is centered on its mating half on the motherboard before applying pressure. Failure to do so will likely destroy both halves of the connector.

Вставьте перевод здесь

Вставьте перевод здесь

Вставьте перевод здесь

Ваш вклад лицензируется под свободной лицензией Creative Commons.