Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 60 guides that include this step.

Английский
Немецкий
Шаг 2
Bend the battery cable slightly away from its socket on the logic board so it does not accidentally connect itself while you work.
  • Bend the battery cable slightly away from its socket on the logic board so it does not accidentally connect itself while you work.

Biege das Akkukabel vorsichtig weg vom Sockel des Logic Boards, damit es sich nicht aus Versehen beim Arbeiten wieder verbindet.

Ваш вклад лицензируется под свободной лицензией Creative Commons.