Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 2 руководства, которые включают этот шаг.
Перевод шага 5
Шаг 5
-
Flip up the beige clip to loosen the cable.
-
Use the wide nosed tweezers to pinch the blue tab attached to the ribbon cable.
-
Pull the blue tab gently in a lateral motion until it is completely out of its port.
- | [* black] Locate the end of the ribbon cable that is attached to the mother board. |
---|---|
- | [* black] Flip up the clip to loosen the cable. The clip is a beige colored piece of plastic. |
- | [* black] Using wide nosed tweezers, pinch the blue tab attached to the ribbon cable. |
- | [* icon_note] Note: You will have to pull firmly, but do not rip it out. |
+ | [* red] Flip up the beige clip to loosen the cable. |
+ | [* black] Use the wide nosed [product|IF145-020|tweezers] to pinch the blue tab attached to the ribbon cable. |
[* black] Pull the blue tab gently in a lateral motion until it is completely out of its port. |
Ваш вклад лицензируется под свободной лицензией Creative Commons .