Перейти к основному содержанию

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 7 руководства, которые включают этот шаг.

Английский
Итальянский
Шаг 2
Use the flat end of a spudger to disconnect the touchpad cable connector from its socket in the logic board. Slightly twisting the flat end of a spudger is an easy way to pry up the cable connector from these types of sockets. Be careful to only pry up against the connector, and not the logic board socket.
  • Use the flat end of a spudger to disconnect the touchpad cable connector from its socket in the logic board.

  • Slightly twisting the flat end of a spudger is an easy way to pry up the cable connector from these types of sockets.

  • Be careful to only pry up against the connector, and not the logic board socket.

Usa l'estremità piatta di uno spudger per disconnettere il connettore del cavo del touchpad dal suo zoccolo sulla scheda logica.

Torcere lievemente l'estremità piatta di uno spudger è un modo facile per staccare il connettore del cavo da questo tipo di zoccoli.

Attenzione a far leva solo sul connettore e non sullo zoccolo della scheda logica.

Ваш вклад лицензируется под свободной лицензией Creative Commons.