Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

Английский
Итальянский
Step 13
Pull the display data cable straight out of its socket on the logic board. Do not lift up on the display data cable, as its socket is very fragile. Pull the cable parallel to the face of the logic board. Do not touch the contacts on the data connector or its socket with your fingers or any tools, as you may deposit oils or damage the pins.
  • Pull the display data cable straight out of its socket on the logic board.

  • Do not lift up on the display data cable, as its socket is very fragile. Pull the cable parallel to the face of the logic board.

  • Do not touch the contacts on the data connector or its socket with your fingers or any tools, as you may deposit oils or damage the pins.

  • Gently bend the display data cable toward the display hinge, to expose the screws on the MagSafe 2 board.

Tira fuori dal suo zoccolino sulla scheda logica il cavo dati del display.

Non sollevare verso l'alto il cavo dati del display, perché il suo zoccolo è molto fragile. Tira il cavo parallelamente alla superficie della scheda logica.

Non toccare con le mani o altri strumenti i contatti sul connettore dati o sul suo alloggiamento, perché potresti sporcare o danneggiare i pin.

Con delicatezza piega il cavo dati del display verso la cerniera del display, per rendere accessibili le viti sulla scheda MagSafe2.

Ваш вклад лицензируется под свободной лицензией Creative Commons.