Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

Английский
Китайский
Step 13
Pull the display data cable straight out of its socket on the logic board. Do not lift up on the display data cable, as its socket is very fragile. Pull the cable parallel to the face of the logic board. Do not touch the contacts on the data connector or its socket with your fingers or any tools, as you may deposit oils or damage the pins.
  • Pull the display data cable straight out of its socket on the logic board.

  • Do not lift up on the display data cable, as its socket is very fragile. Pull the cable parallel to the face of the logic board.

  • Do not touch the contacts on the data connector or its socket with your fingers or any tools, as you may deposit oils or damage the pins.

  • Gently bend the display data cable toward the display hinge, to expose the screws on the MagSafe 2 board.

把显示器数据排线从它在主板上的插槽中直拉出来。

不要把显示器数据排线向上抬,因为它的插槽非常纤细。拉排线的时候要平行于主板拉。

不要用你的手指或其他任何工具触碰数据插头或其插槽,因为你可能会在针脚上留下油渍或是弄伤它。

轻轻地把显示器数据排线弯向屏轴方向,以便拆掉MagSafe2板上的螺丝。

Ваш вклад лицензируется под свободной лицензией Creative Commons.