Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 25 guides that include this step.

Английский
Японский
Шаг 4
Rotate the display out of the outer case enough to disconnect the LED backlight power cable from the LED driver board. Disconnect the LED backlight power cable by depressing the locking mechanism while pulling the connector away from its socket (toward the bottom edge of the iMac).
  • Rotate the display out of the outer case enough to disconnect the LED backlight power cable from the LED driver board.

  • Disconnect the LED backlight power cable by depressing the locking mechanism while pulling the connector away from its socket (toward the bottom edge of the iMac).

LEDドライバボードから、LEDバックライトの電源ケーブルの接続を外すため、ディスプレイをアウターケースから回転させて取り出します。

コネクタをソケットから引き離しながら(iMacの下端に向かって)ロック機構を押し下げ、LEDバックライト電源ケーブルの接続を外します。

Ваш вклад лицензируется под свободной лицензией Creative Commons.