Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

Английский
Испанский
Step 3
While Pulling on the suction cup, slide a thin plastic spacer (guitar picks work well) between the back cover and the phone. Slide it around the edges to break the adhesive seal. Be careful, but don't be afraid to use some force. You should hear a sticky breaking sound. While Pulling on the suction cup, slide a thin plastic spacer (guitar picks work well) between the back cover and the phone. Slide it around the edges to break the adhesive seal. Be careful, but don't be afraid to use some force. You should hear a sticky breaking sound.
  • While Pulling on the suction cup, slide a thin plastic spacer (guitar picks work well) between the back cover and the phone. Slide it around the edges to break the adhesive seal. Be careful, but don't be afraid to use some force. You should hear a sticky breaking sound.

Mientras tiras de la ventosa, desliza un separador plástico (una ceja de guitarra es un buen ejemplo) entre la tapa trasera y el teléfono. Deslízalo alrededor de los bordes para romper el sello adhesivo. Ten cuidado, pero no tengas miedo de usar algo de fuerza. Deberías oir como se rompe el pegamento.

Ваш вклад лицензируется под свободной лицензией Creative Commons.