Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 23 guides that include this step.

Английский
Французский
Step 11
In the next four steps, take care to pry up only on the cable connectors, and not on their sockets on the logic board. Use a spudger or a fingernail to disconnect the front-facing camera and sensor cable connector.
  • In the next four steps, take care to pry up only on the cable connectors, and not on their sockets on the logic board.

  • Use a spudger or a fingernail to disconnect the front-facing camera and sensor cable connector.

Lors des quatre étapes suivantes, veillez à ne faire levier que sur les nappes des connecteurs, et non pas sur leurs prises sur la carte mère.

A l'aide de l'extrémité plate d'une spatule (spudger), déconnectez le connecteur de la caméra avant et de la nappe de capteur.

[* icon_caution] In the next four steps, take care to pry up '''only''' on the cable connectors, and not on their sockets on the logic board.
[* black] Use the flat end of a spudger or a fingernail to disconnect the front-facing camera and sensor cable connector.
[* black] Use the flat end of a spudger or a fingernail to disconnect the front-facing camera and sensor cable connector.

Ваш вклад лицензируется под свободной лицензией Creative Commons.