Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 23 guides that include this step.

Английский
Китайский
Step 11
In the next four steps, take care to pry up only on the cable connectors, and not on their sockets on the logic board. Use a spudger or a fingernail to disconnect the front-facing camera and sensor cable connector.
  • In the next four steps, take care to pry up only on the cable connectors, and not on their sockets on the logic board.

  • Use a spudger or a fingernail to disconnect the front-facing camera and sensor cable connector.

在接下来的四个步骤中,使用撬棒时注意只撬排线接口,而不是接口插座。

使用撬棒或手指甲断开前摄像头和传感器排线接口。

Ваш вклад лицензируется под свободной лицензией Creative Commons.