Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 79 руководства, которые включают этот шаг.

Английский
Французский

Перевод шага 1

Шаг 1
Before proceeding, power down your MacBook. Close the display and lay it on a soft surface, top-side down.
  • Before proceeding, power down your MacBook. Close the display and lay it on a soft surface, top-side down.

  • Use a P5 Pentalobe driver to remove ten screws securing the lower case, of the following lengths:

  • Two 9 mm screws

  • Eight 2.6 mm screws

Avant de commencer, éteignez votre appareil. Fermez l'écran et posez-le à l'envers sur une surface douce.

Retirez les dix vis suivantes :

Deux vis Pentalobe P5 9 mm

Huit vis Pentalobe P5 2.6 mm

Vous trouverez ici le tournevis spécial dont vous aurez besoin pour enlever les vis Pentalobe.

[* icon_note] Before proceeding, power down your machineMacBook. Close the display and lay it on a soft surfacesurface, top-side down.
[* black] RemoveUse a [product|IF145-090|P5 Pentalobe] driver to remove ten screws securing the lower case, of the following ten screwslengths:
[* red] Two 9 mm P5 Pentalobe screws
[* orange] Eight 2.6 mm P5 Pentalobe screws
[* black] The special screwdriver needed to remove the ten 5-point Pentalobe
screws can be found [product|IF145-090|here].
[* icon_note] Before proceeding, power down your machineMacBook. Close the display and lay it on a soft surfacesurface, top-side down.
[* black] RemoveUse a [product|IF145-090|P5 Pentalobe] driver to remove ten screws securing the lower case, of the following ten screwslengths:
[* red] Two 9 mm P5 Pentalobe screws
[* orange] Eight 2.6 mm P5 Pentalobe screws
[* black] The special screwdriver needed to remove the ten 5-point Pentalobe
screws can be found [product|IF145-090|here].

Ваш вклад лицензируется под свободной лицензией Creative Commons.