Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 79 guides that include this step.

Английский
Японский

Translating step 1

Шаг 1
Before proceeding, power down your MacBook. Close the display and lay it on a soft surface, top-side down.
  • Before proceeding, power down your MacBook. Close the display and lay it on a soft surface, top-side down.

  • Use a P5 Pentalobe driver to remove ten screws securing the lower case, of the following lengths:

  • Two 9 mm screws

  • Eight 2.6 mm screws

作業を始める前に、コンピュータの電源を落として下さい。ディスプレイを閉じ柔らかい表面の上に置いてください。

次の10本のネジを取り外します。

9mm P5 星形ペンタロープネジ 2本

2.6mm P5 星形ペンタロープネジ 8本

8本の星形ペンタローブネジを取り外すために必要な特殊ドライバーは、こちらです。

[* icon_note] Before proceeding, power down your machineMacBook. Close the display and lay it on a soft surfacesurface, top-side down.
[* black] RemoveUse a [product|IF145-090|P5 Pentalobe] driver to remove ten screws securing the lower case, of the following ten screwslengths:
[* red] Two 9 mm P5 Pentalobe screws
[* orange] Eight 2.6 mm P5 Pentalobe screws
[* black] The special screwdriver needed to remove the ten 5-point Pentalobe
screws can be found [product|IF145-090|here].
[* icon_note] Before proceeding, power down your machineMacBook. Close the display and lay it on a soft surfacesurface, top-side down.
[* black] RemoveUse a [product|IF145-090|P5 Pentalobe] driver to remove ten screws securing the lower case, of the following ten screwslengths:
[* red] Two 9 mm P5 Pentalobe screws
[* orange] Eight 2.6 mm P5 Pentalobe screws
[* black] The special screwdriver needed to remove the ten 5-point Pentalobe
screws can be found [product|IF145-090|here].

Ваш вклад лицензируется под свободной лицензией Creative Commons.